Toshiba e-STUDIO206L Service Manual page 170

(9) Release the harness from the harness
holder.
(10) Remove 1 screw.
(11) Lift up the front side of the exposure lamp
and take off by sliding it.
[B] LED
(1) Take off the original glass.
 P. 4-26 "4.5.1 Original glass"
(2) Take off the front upper cover.
 P. 4-1 "4.1.2 Front upper cover"
(3) Rotate the drive pulley and move the
carriage-1 so that the screw can be seen.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 30
Fig. 4-87
Exposure lamp
Fig. 4-88
Fig. 4-89