Toshiba e-STUDIO206L Service Manual page 280

(6) Remove 1 clip and take off the gear unit.
(7) Remove 1 E-ring and 1 bushing, and then
pull up the ADU lower transport roller by
sliding it to the direction of the arrow.
(8) Take off the ADU clutch.
Notes:
When installing the ADU clutch, fit the guide
of the ADU cover in the groove of the ADU
clutch.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Gear unit
ADU clutch
ADU lower transport roller
ADU cover Guide
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 140
Clip
Fig. 4-395
E-ring
Bushing
Fig. 4-396
ADU clutch
Rotation stopper
Fig. 4-397