4.9.5
Paper stock sensor (S15/S18)
(1)
Take off the drawer feeding unit
( P. 4-63 "4.9.2 Drawer feeding unit").
(2)
Pull up the paper stock sensor arm.
(3)
Disconnect the connector and release the 3
latches to take off the paper stock sensor.
4.9.6
Separation roller
(1)
Take off the drawer feeding unit
( P. 4-63 "4.9.2 Drawer feeding unit").
(2)
Remove 1 screw and take off the separation
roller holder.
(3)
Detach the lever from the holder and take off
the separation roller with the shaft.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-183
Separation roller holder
Fig. 4-184
Separation roller
Fig. 4-185
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 65
Paper stock sensor
Lever
DISASSEMBLY AND REPLACEMENT
4