Kd-1025 (Paper Feed Pedestal (Pfp)) - Toshiba e-STUDIO206L Service Manual

(9) Slide the RADF backward and take it off by
lifting it up.
4.16.2

KD-1025 (Paper Feed Pedestal (PFP))

(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover.
(3) Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 connectors
if the optional damp heater is installed).
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-412
Connector cover
Fig. 4-413
Fig. 4-414
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 145
DISASSEMBLY AND REPLACEMENT
4