Mode Settings; Connection Model Settings; Paper Type Settings - Toshiba e-STUDIO206L Service Manual

[ 1-2 ] Mode settings / connection model settings / paper type settings
(1) Press [Button1] 11 times and then press [Button2] once.
Check the setting list and press [Button1] as many times as noted for Setting code whose
operation you want to check and then press [Button2] once.
<Setting list>
*Example of operation
If you want to select the normal paper mode, the number of Setting code is "1".
Therefore press [Button1] 11 times and then press [Button2] once. Then press [Button1] once
and then press [Button2] once. This selects the normal paper mode.
(2) Press [Button1] and [Button2] simultaneously.
(3) Press [Button1] 11 times and then press [Button2] once.
(4) Press [Button1] 8 times and then press [Button2] once.
(5) Press [Button1] and [Button2] simultaneously.
(6) Press [Button1] 11 times and then press [Button2] once.
Check the setting list and press [Button1] as many times as noted for Setting code whose paper
type you want to select and then press [Button2] once.
<Setting list>
*Example of operation
If you want to select the plain paper, the number of Setting code is "4".
Therefore press [Button1] 11 times and the press [Button2] once. Then press [Button1] 4
times and then press [Button2] once. This selects plain paper.
(7) Press [Button1] and [Button2] simultaneously.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
LED3 LED2
Button1
Fig.6-117
Model name
Normal paper mode
Recycled paper mode
Paper type
Plain paper
Thick paper 1
Thick paper 2
Thick paper 3
6 - 102
LED1
Button2
Setting code
1
3
Setting code
4
5
6
7
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved