Toshiba e-STUDIO206L Service Manual page 274

4.15 AUTOMATIC DUPLEXING UNIT (ADU)
4.15.1 Automatic Duplexing Unit (ADU)
(1) Take off the right rear cover-1 and the right
rear cover-2.
( P. 4-6 "4.1.13 Right rear cover-1 / Right
rear cover-2")
(2) Open the ADU.
(3) Disconnect 2 connectors and remove 1
screw.
Notes:
When fixing the screw, connect the ground
wire.
(4) Slid the lever to the direction of the arrow.
(5) Remove 1 screw.
Slid and take off the fixing band, and then
take off the ADU to the direction of the arrow.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Fixing band
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 134
Connector
Ground wire
Fig. 4-377
Lever
Fig. 4-378
ADU
Fig. 4-379