Upper Drawer Detection Switch (Sw6); Hi-Speed Clutch (Clt6) / Low-Speed Clutch(Clt7) - Toshiba e-STUDIO206L Service Manual

4.9.27

Upper drawer detection switch (SW6)

(1) Pull out the upper drawer.
(2) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(3) Disconnect 1 connector and then take off the
upper drawer detection switch.
4.9.28

Hi-speed clutch (CLT6) / Low-speed clutch(CLT7)

(1) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(2) Remove 1 clip and then take off the bushing.
(3) Remove 3 screws and then take off the
bracket.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Upper drawer detection switch
Fig. 4-226
Bushing
Clip
Fig. 4-227
Bracket
Fig. 4-228
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 80