Bypass Paper Sensor (S12) - Toshiba e-STUDIO206L Service Manual

(3) Take off the shaft by sliding it.
Notes:
When installing the bypass feed clutch, be
sure that the rotation stopper is inserted in
the hole of the guide securely.
(4) Remove 1 clip and 2 bushings. Then take off
the bypass feed roller and the bypass feed
clutch.
4.9.15

Bypass paper sensor (S12)

(1) Take off the bypass feed unit
( P. 4-71 "4.9.12 Bypass feed unit").
(2) Disconnect 1 connector and then take off the
bypass paper sensor by releasing 3 latches.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-205
Clip
Shaft
Bypass feed clutch
Fig. 4-206
Fig. 4-207
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 73
Shaft
Bypass feed roller
Bypass paper sensor
DISASSEMBLY AND REPLACEMENT
4