Lower Tray-Up Motor (M12) - Toshiba e-STUDIO206L Service Manual

(4) Disconnect 1 connector and then take off the
lower drawer detection switch.
4.9.30

Lower tray-up motor (M12)

(1) Pull out the lower drawer.
(2) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(3) Disconnect 1 connector and take off the
harness clamp from the bracket.
(4) Remove 2 screws and take off the lower tray-
up motor along with the bracket.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Lower drawer detection switch
Fig. 4-232
Fig. 4-233
Bracket
Fig. 4-234
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 82