Mic With 2X40Ge Qsfp+ Interfaces (Srx-Mic-2X40G-Qsfp) - Juniper SRX5400 Manual

MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP)

Description
Software release
Cables and connectors
Supported slots
Weight
LEDs
Copyright © 2016, Juniper Networks, Inc.
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The
SRX-MIC-2X40G-QSFP (see
40-Gigabit quad small form-factor pluggable (QSFP+) Ethernet ports.
Figure 17: SRX-MIC-2X40G QSFP
MIC with two QSFP+ Ethernet ports
Fits into MPC
Supports up to 80 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
Maximum throughput: 80 Gbps
Junos OS Release 12.1X46-D10
Sockets for two QSFP+ 40-Gigabit Ethernet fiber-optic transceivers.
Supported QSFP+ transceiver:
40GBASE-SR4 (model number SRX-QSFP-40G-SR4)
40GBASE-LR4 (model number SRX-QSFP-40G-LR4)
Either slot in SRX5K-MPC
Approximately 1.6 lb (0.7 kg)
LED, one bicolor:
OK/FAIL
Green–The MIC is operating normally.
Red–The MIC has failed and is not operating normally.
Off–The MIC is powered down.
LED, single color, one per QSFP+ port:
LINK
Green–The link is active.
Off–No link.

MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP)

Figure 17 on page 27) can be installed in an MPC to add two
27