Mic With 2X40Ge Qsfp+ Interfaces (Srx-Mic-2X40G-Qsfp) - Juniper SRX5400 Manual

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference
Serial number location
Related
Documentation

MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP)

Description
26
The serial number label is yellow and located as shown in
Figure 16: SRX-MIC-1X100G-CFP Serial Number Label
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
Modular Port Concentrator (SRX5K-MPC) on page 18
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The
SRX-MIC-2X40G-QSFP (see
40-Gigabit quad small form-factor pluggable (QSFP+) Ethernet ports.
Figure 17: SRX-MIC-2X40G QSFP
MIC with two QSFP+ Ethernet ports
Fits into MPC
Supports up to 80 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
Serial number
ID label
Figure 17 on page 26) can be installed in an MPC to add two
Copyright © 2014, Juniper Networks, Inc.
Figure 16 on page 26.