Device Front Panel Mib Overview; Device Call Directory Mib Overview; Device Configuration Mib Overview; Mib-Ii Support - Paradyne COMSPHERE 6700 Series User Manual

Enterprise Device MIBs

Device Front Panel MIB Overview

Device Call Directory MIB Overview

Device Configuration MIB Overview

MIB-II Support

A-2
The Front Panel MIB provides remote access to the front panel of a device and is
accessed using the community procedures used for the 6700 Device MIB. Front
panel keypress codes can be sent to the device in Set requests. The current front
panel display can be retrieved with a Get request to the front panel display table.
Refer to Table A-2, Device Front Panel MIB
The Call Directory MIB contains call directory data for a device and is accessed
using the community procedures used for the 6700 Device MIB. The number of
entries in a device's call directory table is dependent on the device type.
Refer to Table A-3, Device Call Directory MIB
The Device Configuration MIB allows copying between the Active, Customer, and
Factory configuration options areas and is accessed using the community
procedures used for the 6700 Device MIB. If a device agent supports the Front
Panel MIB, it must also support this group.
Refer to Table A-4, Device Configuration MIB
The SNMP Proxy Agent feature includes support for the standard Management
Information Base (MIB-II) used with network management protocols in
TCP/IP-based internets. Specific characteristics of the system and interface
groups are noted in the following sections. The following MIB-II groups are
supported as specified in RFC 1213.

System Group

Interface Group
NOTE:
Because this product is a proxy agent , the MIB-II information reflects the
state of the TCP/IP interface in the workstation where the proxy is running.
If a MIB-II variable is accessed for a proxied device, the MIB-II value for the
proxy workstation is returned.
September 1998
Objects.
Objects.
Objects.
6700-A2-GB20-30