To select another waveform:
For example, to specify a DC signal:
l
To produce the DC output:
SCPI:
FUNCtion {SIN|SQU|RAMP|PULSe|NOIS|DC|PRBS|ARB}
l
The
APPLy
command configures a waveform with one command.
Output Frequency
As shown below, the output frequency range depends on the function (default frequency 1 kHz for all functions).
Function
Minimum Frequency
Sine
1 µHz
Square
1 µHz
Ramp/Tri.
1 µHz
Pulse
1 µHz
PRBS
1 µbps
Arbitrary
1 µSa/s
Agilent 33500 Series Operating and Service Guide
Maximum Frequency
30 MHz
30 MHz
200 kHz
30 MHz
50 Mbps
250 MSa/s
Output Configuration
57