Agilent Technologies Agilent 33500 Series Operating And Service Manual page 184

CALibration:VALue < value >
CALibration:VALue?
Specifies the value of the known calibration signal.
Parameter
Numeric, default 0.0
Specify calibration value 0.0237:
CAL:VAL 2.37E-2
This setting is non-volatile; it will not be changed by power cycling or *RST.
l
Agilent 33500 Series Operating and Service Guide
Typical Return
+1.72300000E+001
CALibration Subsystem
183