Agilent Technologies Agilent 33500 Series Operating And Service Manual page 244

LXI:RESTart
Restarts the LAN with the current settings as specified by the
Parameter Typical Return
(none) (none)
Restart the LAN interface:
LXI:REST
Depending on your network, the LAN interface may take several seconds to restart after this command is sent.
l
If the LAN interface or specific LAN services (VXI-11, sockets, and so on) have been disabled by
l
Tem:COMMunicate:ENABle, you must separately re-enable the interface or services and cycle power on the instru-
ment for the LAN to be operational.
Agilent 33500 Series Operating and Service Guide
SYSTem:COMM:LAN commands.
LXI Subsystem
SYS-
243