Agilent Technologies Agilent 33500 Series Operating And Service Manual page 160

{SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|PRBS|ARB}, default
SINusoid, default SINusoid.
View internal function waveforms.
Select a sine wave as the modulating waveform.
AM:INT:FUNC SIN
This command should be used only with the internal modulation source
l
Pulse and DC cannot be carrier waveform for AM.
l
Agilent 33500 Series Operating and Service Guide
Parameter Typical Return
SIN, SQU, RAMP, NRAM, TRI, NOIS,
PRBS, or ARB
(AM:SOURce INTernal).
AM Subsystem
159