Show Access-Lists - Cisco Small Business 300 1.1 Series Administration Manual

ACL Commands
78-20269-01 Command Line Interface Reference Guide
--------------
absolute start 12:00 1 jan 2005
absolute end 12:00 31 dec 2005
periodic monday 8:00 to friday 20:00

40.14 show access-lists

Use the show access-lists Privileged EXEC mode command to display access
control lists (ACLs) configured on the switch.
Syntax
name
show access-lists [
show access-lists
Parameters
•
name—Specifies the name of the ACL.
Command Mode
Privileged EXEC mode
Example
Console#show access-lists
Standard IP access list 1
deny any
Standard IP access list 2
deny 192.168.0.0, wildcard bits 0.0.0.255
permit any
Standard IP access list 3
deny 0.0.0.0
deny 192.168.0.1, wildcard bits 0.0.0.255
permit any
Standard IP access list ACL1
permit 0.0.0.0
]
40
552