Show Access-Lists - Cisco catalyst 3750 Command Reference Manual

show access-lists

show access-lists
Use the show access-lists privileged EXEC command to display access control lists (ACLs) configured
on the switch.
Syntax Description name
number
hardware counters
ipc
| begin
| exclude
| include
expression
Note Though visible in the command-line help strings, the rate-limit keywords are not supported.
Command Modes Privileged EXEC
Command History Release
12.1(11)AX
12.1(14)EA1
Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
This command also displays the MAC ACLs that are configured.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Catalyst 3750 Switch Command Reference
2-486
show access-lists [name | number | hardware counters | ipc] [ | {begin | exclude | include}
expression]
Modification
This command was introduced.
The ipc keyword was added.
(Optional) Name of the ACL.
(Optional) ACL number. The range is 1 to 2699.
(Optional) Display global hardware ACL statistics for switched and
routed packets.
(Optional) Display Interprocess Communication (IPC) protocol
access-list configuration download information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07