Show Access-Lists - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show access-lists

To display all IPv4 and MAC access control lists (ACLs) or a specific ACL, use the show access-lists
command.
Syntax Description access-list-name
Command Default
The switch shows all ACLs unless you use the access-list-name argument to specify an ACL.
Command Modes
EXEC mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display all IPv4 and MAC ACLs on the switch:
switch# show access-lists
In Cisco NX-OS Release 5.2(1)N1(1), the following output is displayed:
switch# show access-lists
IP access list BulkData
IP access list CriticalData
IP access list Scavenger
MAC access list acl-mac
IP access list denyv4
IP access list dot
lash-override
OL-27883-02
show access-lists [access-list-name]
(Optional) Name of an ACL, which can be up to 64 alphanumeric,
case-sensitive characters.
Modification
This command was introduced.
10 deny ip any any
10 deny ip any any
10 deny ip any any
10 permit any any
20 deny ip 10.10.10.0/24 10.20.10.0/24 fragments
30 permit udp 10.10.10.0/24 10.20.10.0/24 lt 400
40 permit icmp any any router-advertisement
60 deny tcp 10.10.10.0/24 10.20.10.0/24 syn
70 permit igmp any any host-report
80 deny tcp any any rst
90 deny tcp any any ack
100 permit tcp any any fin
110 permit tcp any gt 300 any lt 400
130 deny tcp any range 200 300 any lt 600
140 deny tcp any range 200 300 any lt 600
statistics per-entry
10 permit ip 20.1.1.1 255.255.255.0 20.10.1.1 255.255.255.0 precedence f
20 deny ip 20.1.1.1/24 20.10.1.1/24 fragments
30 permit tcp any any fragments
Cisco Nexus 5500 Series NX-OS Security Command Reference
show access-lists
255