Print Counter Operation - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

5.2.1.1 Print Counter Operation

This diagnostic displays the total number of print cycles. This print count is taken from the actuator

signals sent to the Feed Solenoid. The total count increments even when paper jams in the paper tray

and is not actually output.

Execute Print Counter Operation:

1 Enter Diagnostics Mode 1. The LCD displays the PRINT COUNTER OPERATION message,

indicating the printer is in Diagnostics Mode 1.

2 Press the ENTER key. The LCD displays the print total.

PRINT COUNTER

Prt Cnt = XXXXXX

XXXXXX = Total number of prints.

3 If you wish to exit this test and enter another test, press the MENU UP (1) or MENU DOWN (5)

key to select another function.

4 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.

General Procedures/Information

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents