Registration Solenoid/Tray 1 Solenoid/Front Tray Solenoid - Xerox DOCUPRINT N17 Service Manual

4.6.14 Registration Solenoid/Tray 1 Solenoid/Front Tray Solenoid

Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Remove the three screws securing the Registration Solenoid, Tray 1 Solenoid, and Front Tray
Solenoid.
3 Pull the three Solenoids away from the Supporter with the wire harness.
NOTE: You can remove these three Solenoids separately at this point.
Figure 4.6.14.1 Registration Solenoid/Tray 1 Solenoid/Front Tray Solenoid Removal
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
SAS433F.CDR
6/98
www.printcopy.info
4-38
SAS433F
Xerox DocuPrint N17 Service Manual