4.9.7 Stack Full Sensor
Removal
1 Remove the Rear Option Cover Plate and the Eliminator Assembly. ( REP 4.9.6 Option Cover/
Eliminator Assembly .)
2 Use a flat-slot screwdriver blade to unhook the Stack Full Sensor clip. (See Figure 4.9.7.1.)
3 Disconnect the connector, and remove the Stack Full Sensor.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 4.9.7.1 Stack Full Sensor Removal
6/98
www.printcopy.info
4-49
SAS454FA
Repair/Adjustment Procedures