Harness Cover - Xerox DOCUPRINT N17 Service Manual

4.2.3 Harness Cover

Removal
1 Open the Front Cover.
2 Press the latch on the left, and use a flat-slot screwdriver to free the latch on the right by slightly
lifting upward. (See Figure 4.2.3.1.)
NOTE: Notice the routing of the harness underneath the Harness Cover.
3 Remove the Harness Cover by pulling it upward and out of the Front Cover Assembly.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 4.2.3.1 Harness Cover Removal
6/98
www.printcopy.info
4-9
sas403fa
Repair/Adjustment Procedures