Weight Assembly/Weight Holder/Weight Arm - Xerox DOCUPRINT N17 Service Manual

11.3.2 Weight Assembly/Weight Holder/Weight Arm

Removal
1. Detach the Weight Assembly from the Top Cover.
2. Detach the Weight Arm from the Weight Holder.
NOTE: The Weight Holder is spared as part of the Weight Arm.
Figure 11.3.2.1 Weight Assembly, Weight Holder, and Weight Arm Removal
Replacement
Perform the removal steps in reverse order
Xerox DocuPrint N17 Service Manual
6/98
www.printcopy.info
11-9
SAS4C4FA
Envelope Feeder Option