4.6.15 Registration Clutch Assembly
Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Remove the Supporter ( REP 4.6.11 Supporter ).
3 Remove the Registration Bushing. (See Figure 4.6.11.1.)
4 Use a flat-slot screwdriver blade to pry off the E-ring.
5 Slide the Registration Clutch Assembly off together with the Idler Gear.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 4.6.15.1 Registration Clutch Assembly Removal
www.printcopy.info
7/99
4-39
SAS434F
Repair/Adjustment Procedures