Image Quality Entry Flowchart - Xerox DOCUPRINT N17 Service Manual

7.5.1 Image Quality Entry Flowchart

Initial Actions
Replace paper in all trays from a previously unopened ream.
Procedure
Use the following Flow Chart to assist in identifying an Image Quality Defect.
The customer has
reported an XIE problem.
Yes
Go to RAP 7.5.20 XIE.
Xerox DocuPrint N17 Service Manual
Make Print Engine and
No
System Controller Test
Prints.
The Image Quality defect
is identified from Image
Quality Defect Definitions
( RAP 7.5.2 ).
Go to RAP 7.5.3 Image
Quality Checkout .
An Image Quality defect is
identified.
Go to Final Actions.
6/98
www.printcopy.info
7-75
Yes
No
Yes
No
Repair Analysis Procedures (RAPs)
Go to the
appropriate
IQ RAP.