Feed Roll Assembly - Xerox DOCUPRINT N17 Service Manual

8.3.5 500 Feed Roll Assembly

NOTE: The removal procedure for the 500 Feed Roll Assembly is the same for Feeders 2 and 3.
Removal
1 Remove Feeder 2 (3) ( REP 8.3.1 Feeder 2 and 3 (Optional) ).
2 Place the Feeder Unit with the Left Cover downward.
3 Reach into the 500 Feed Roll Solenoid and manually disengage the 500 Feed Roll latch.
4 Rotate the 500 Feed Roll Assembly by 180 degrees and take the 500 Feed Roll Assembly off of
the shaft by opening its latches.
Replacement
Perform the removal steps in reverse order.
500-Sheet Paper Feeder Option
Figure 8.3.5.1 Removing the 500 Feed Roll Assembly
www.printcopy.info
6/98
8-14 Xerox DocuPrint N17 Service Manual
SAS474FA