Confirm Envelope Solenoid Operation - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

5.2.1.9 Confirm Envelope Solenoid Operation

This diagnostic tests Envelope Tray Feed Solenoid function.

Execute Confirm Envelope Solenoid Operation:

1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the

printer is in Diagnostics Mode 1.

2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the C ONFIRM

ENVELOPE SOLENOID OPERA. message .

3 Press the ENTER key to start the test. The LCD displays the CONFIRM ENVELOPE message.

CONFIRM ENVELOPE

Operation EXECED

4 Verify that when you press the ENTER key, the Envelope Tray Feed Solenoid energizes

momentarily.

5 If you wish to exit this test and enter another test use the MENU UP (1) or MENU DOWN (5) key

to scroll to another test.

6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.

General Procedures/Information

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents