Page 1
Finishing Solutions Planning Guide Supported Printers: • Xerox DocuTech 61xx • Xerox Nuvera 100 / 120 Digital Production System Xerox Document Stacker 5000 (DS5000) July 13, 2005 Rev. Draft 2...
Page 2
Webster, NY 14580 Copyright 2004 Xerox Corporation. All rights reserved. Printed in the United States of America. Please contact Xerox Feeding and Finishing with any comments or suggestions regarding the content within this document: xeroxfinishing@usa.xerox.com Copyright protection claimed includes all forms and matters of copyrighted material and information now...
About this guide Contents The purpose of this document is to describe the features and operation of the Xerox Document Stacker 5000 (DS5000). It also provides information to be used when planning the installation of the DS5000 together with: •...
Xerox Document Stacker 5000 (DS5000) The Xerox Document Stacker 5000 (DS5000) High Capacity Stacker provides long periods of unattended operation and facilitates the transport of accumulated offset stacks of printed output for post processing. The stacks are easily moved on one of two wheeled dollies supplied with each stacker.
Install Planning This Install Planning guide will help you prepare for the installation of the Document Stacker 5000. Device Configurations The DS5000 components are: • Document Stacker 5000 • Paper dollies (2 delivered with each stacker) Space Requirements The space requirements diagram provides machine footprint as well as the overall operating and maintenance area.
Sound Emission 72 db Altitude No restrictions. Estimated Installation Time The Xerox CSE installs the DS5000 and the estimated installation time is 1.5 hour. Operating Supplies There are no operating supplies for the DS5000. Document Stacker 5000 39.4” x 28.7” x 47.2”...
The DT61xx must be equipped with a Bypass Transport to enable in-line Finishing. Configuration Guide The Configuration Guide contains diagrams over the various Finishing Solutions that are available. Printer Configurations BYPASS INTERPOSER TRANSPORT Productivity Guide The DS5000 does not affect the base printers output speed.
3. Xerox Nuvera 100 / 120 Digital Production System Performance Specifications Listed below are the Performance Specifications for the Document Stacker 5000. Stacking Paper Size / Weight Capacity Input Height Output Height Limitations • The stacker performance is dependent on the printer module decurler settings.
The Finisher Transport Module is required for in-line connectivity to the printer. • Currently, a Xerox Document Stacker 5000 must be installed in-line with the printer if another in-line device is a part of the solution. Note: In case the floor at the customer site is very uneven, it is recommended that the Nuvera IOT is installed and leveled with a Caster Leveling Kit (kit number 498K07900).
For installations made in the US and Canada, a copy of the signed Customer Agreement must A) Attached to the XOA / Customer purchase order and faxed to SPA: 1-800 –407-8430. B) Scanned and emailed to Phil.Schmelzlen@xerox.com, or faxed to Phil Schmelzlen (585) 427-3140 (8*227-3140).