9.3.3 Exit Tray
Removal
1 Remove the OCT Unit ( REP 9.3.1 OCT Unit) .
2 Disengage the left side of the Exit Tray from the holes in the OCT Cover.
3 Disengage the right side of the Exit Tray from the holes in the OCT Cover, taking care of the
springs.
Replacement
Perform the removal steps in reverse order.
Offset Catch Tray (OCT) Option
Figure 9.3.3.1
Removing the Exit Tray
6/98
www.printcopy.info
9-10
SAS4A4F
Xerox DocuPrint N17 Service Manual