Oct Reps; Oct Unit - Xerox DOCUPRINT N17 Service Manual

9.3 OCT REPS

9.3.1 OCT Unit

Removal
1 Press the two latches in the bottom part of the rear surface of the OCT Unit, and raise the unit
from behind.
2 Disengage the hook inserted in the Top Cover near the Fan at the left side for the base engine
from the Top Cover.
NOTE: Raise the OCT Unit about 3 cm by step 1 and then move it rearward about 3 cm; the hook comes
out of the Top Cover.
Replacement
Perform the removal steps in reverse order.
Offset Catch Tray (OCT) Option
Figure 9.3.1.1 Removing the OCT Unit
6/98
www.printcopy.info
9-8
SAS4A2FA
Xerox DocuPrint N17 Service Manual