Confirm Direction Solenoid Operation - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

5.2.1.10 Confirm Direction Solenoid Operation

This diagnostic tests the Exit Direction Solenoid function.

Execute Confirm Direction Solenoid Operation:

1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the

printer is in Diagnostics Mode 1.

2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the CONFIRM DIRECT

SOLENOID OPERA. message .

3 Press the ENTER key to execute the test. The LCD displays the CONFIRM DIRECT OPERA.

CONFIRM DIRECT

Operation EXECED

4 Verify that the Exit Direction Solenoid energizes momentarily.

NOTE: The Direction Solenoid is physically located in the Offset Catch Tray accessory. This option must

be installed to verify operation of the Exit Direction Solenoid.

5 If you wish to exit this test and enter another test use the MENU UP (1) or MENU DOWN (5) key

to scroll to another test.

6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.

Xerox DocuPrint N17 Service Manual

www.printcopy.info

General Procedures/Information

Table of Contents