8.3.10 No Paper Actuator
NOTE: The removal procedure for the No Paper Actuator is the same for Feeders 2 and 3.
Removal
1 Remove the 500 Chute Assembly ( REP 8.3.2 500 Chute Assembly ).
2 Put the 500 Chute Assembly upside down.
3 Push/pry the left end of the Actuator off of the Chute and then shift the right end portion off along
the shaft to remove it.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 8.3.10.1 Removing the No Paper Actuator
6/98
www.printcopy.info
8-19
SAS479FC
500-Sheet Paper Feeder Option