Rear Cover Sensor - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

4.9.5 Rear Cover Sensor

1 Remove the Top Cover Assembly ( REP 4.2.6 Top Cover Assembly ).

2 Turn the Top Cover Assembly over.

3 Unhook the Rear Cover Sensor clip by pressing it from the rear of the Top Cover Assembly, and

remove the Rear Cover Sensor. (See Figure 4.9.5.1.)

4 Unplug the Rear Cover Sensor connector, and remove the sensor.

Perform the removal steps in reverse order.

Xerox DocuPrint N17 Service Manual

Figure 4.9.5.1 Rear Cover Sensor Removal

www.printcopy.info

Repair/Adjustment Procedures

Table of Contents