Offset Motor/Oct Sensor/Cam Gear - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

9.3.10 Offset Motor/OCT Sensor/Cam Gear

1 Remove the Offset Assembly ( REP 9.3.9 Offset Assembly/Exit Sensor Assembly) .

2 Remove the two screws which fasten the Offset Motor.

3 Lift off the Offset Motor.

4 Press the latches of the shaft of the Cam Gear inward to slide off the Cam Gear.

5 Press the latches of the OCT Home Sensor inward to detach the OCT Home Sensor.

Figure 9.3.10.1 Removing the Offset Motor/OCT Sensor/Cam Gear

Perform the removal steps in reverse order.

Xerox DocuPrint N17 Service Manual

www.printcopy.info

Offset Catch Tray (OCT) Option

Table of Contents