12.3.4 Paper Feed Motor Assembly
Removal
1. Disconnect the AC Power Cord from the High Capacity Feeder.
2. Remove the four screws that secure the Rear Access Cover. Remove the access cover.
3. Disconnect J1 from the Feeder Controller PWB.
4. Slide the feeder drawer open.
5. Remove the three screws that secure the Left Cover to the drawer frame (Figure 12.3.4.1). Remove
the cover.
6. Cut the cable ties that secure the Feeder Motor Harness (Figure 12.3.4.1).
7. Remove the two screws that secure the Feed Motor Assembly. Remove the assembly (Figure
12.3.4.1).
J1
Replacement
1. Perform the removal steps in reverse order.
High Capacity Feeder Option
5
6
7
J6
J5
J2
J4
J3
J1
J8
J7
J9
Figure 12.3.4.1 Paper Feed Motor Assembly.
www.printcopy.info
6/98
12-14
Xerox DocuPrint N17 Service Manual
rep_04