5.1.4.12 Novell Menu
The Novell Menu allows you to modify Novell parameters. It appears only if Novell is enabled from the
Ethernet menu. To select the Novell Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Novell Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Novell submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Job Menu
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
2
Ethernet Menu
Token Ring Menu
3
Novell Menu
4
Print Menu
5
Reset Menu
1
Appears only when the hard drive is installed.
2
Appear only when the option is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
Xerox DocuPrint N17 Service Manual
Figure 5.1.4.12.1 Novell Menu
Novell Enable
1
Novell PDL
Novell Binary PS
Novell Mode
Frame Type
2
Polling Interval
PServer Name
Primary Server
NDS Tree
NDS Context
www.printcopy.info
On*
Auto *
PCL
On*
NDS
BEM
Auto*
802.2
802.3
1 - 29 (2*)
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
3/99
5-21
Off
PostScript
Off
NDS/BEM*
SNAP
Ethernet II
General Procedures/Information