Electrical Module Ii; System Controller Chassis - Xerox DOCUPRINT N17 Service Manual

4.12 Electrical Module II

4.12.1 System Controller Chassis

Removal
1 Remove the Left Cover ( REP 4.2.2 Left Cover ).
2 Remove the Left Front Cover ( REP 4.2.5 Left Front Cover ).
3 Remove the System Controller PWB.
4 Remove the seven screws securing the System Controller Chassis. (See Figure 4.12.1.1.)
5 Free the Wire Harnesses from the Paper Handling Unit Assembly.
6 Remove the System Controller Chassis.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.12.1.1 System Controller Chassis Removal
SAS464F.CDR
www.printcopy.info
6/98
4-56 Xerox DocuPrint N17 Service Manual
sas464fb