Erratic Operation - Xerox DOCUPRINT N17 Service Manual

7.4.4 Erratic Operation

1 The printer enters the printing cycle.
Y: Go to step 2.
N: Go to step 3.
2 Enter the Test Print Mode and perform the Test Print operation. The printer outputs the prints as
usual.
Y: Go to step 4.
N: Replace the Print Engine Controller.
3 A reset occurs while the printer is printing an output.
Y: Go to RAP 7.4.25 Electrical Noise.
N: Go to step 4.
4 Install a new Print Engine Controller. The code still appears.
Y: Replace the System Controller.
N: Correction completed.
Xerox DocuPrint N17 Service Manual
6/98
www.printcopy.info
7-45 Repair Analysis Procedures (RAPs)