Making Call Display Information Appear Automatically At A Telephone; Changing Which Information Is Shown First About A Call - Nortel Modular ICS 4.0 Manual

36 / Answering calls
Making Call Display information appear automatically at a
telephone
Each telephone that rings for an external line can display Call
Display information for that line. After the call is answered,
Call Display information is always shown at the telephone that
answered the call. Your installer or customer service
representative can program telephones to have automatic Call
Display.
This feature is not available to ISDN terminals.
Changing which information is shown first about a call
Depending on the services you subscribe to, Call Display
information may contain up to three parts: the name of the
caller, the number of the caller, and the name of the line in your
Norstar system that the call is on. For each telephone, you can
determine which information is displayed first.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
≠
telephone you want to program.
'
4. Press
≠
5. Press
6. Press
7. Choose a setting at 1stDisplay: using the CHANGE button.
The choices are Name, Numbr or Line.
Modular ICS 4.0 System Coordinator Guide
(the default System Coordinator
and enter the internal number of the
.
four times.
.
.
P0881591 Issue 01