Nortel Modular ICS 4.0 Manual page 60

Modular system coordinator guide
Table of Contents

Advertisement

ƒ••¤flfl‹››
48 / Answering calls
¤‹fl›fl
1. Press
2. Press
password).
3. Press
telephone you want to program.
'
4. Press
5. Press
6. Choose a setting at Handsfree: using the CHANGE button.
There are three ways to set Handsfree for an individual
telephone:
Handsfree:None
Handsfree:Auto
Handsfree:Std
For other displays, see "Common feature displays" on page 203.
Both Auto and standard Handsfree allow you to use a headset
with a Norstar telephone.
A Handsfree/Mute button is automatically assigned to a
telephone that is programmed with Handsfree and is always
located in the lower right-hand corner of the telephone.
Modular ICS 4.0 System Coordinator Guide
(the default System Coordinator
and enter the internal number of the
twice.
three times.
Handsfree is not available to the telephone.
CHANGE
You can make or answer a call without
©
CHANGE
having to pick up the receiver or press
microphone and speaker turn on
automatically when you press a line or
intercom button to make or answer a call.
A standard version of Handsfree described
CHANGE
"Using Handsfree/Mute" on page 45.
.
. The telephone's internal
P0881591 Issue 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents