Answering Any Ringing Telephone Using Group Pickup; Changing A Telephone's Pickup Group - Nortel Modular ICS 4.0 Manual

38 / Answering calls

Answering any ringing telephone using Group Pickup

Your Norstar system can be divided into nine pickup groups.
If you are a member of a pickup group, you can pick up a call
ƒ‡fi
that is ringing at any telephone in your pickup group.
Press
Group Pickup cannot be used to retrieve a camped call.
If there is more than one incoming call at a telephone in a
pickup group, a call ringing on an external line is answered
first followed by calls on the prime line and, finally, calls on
internal lines.
Tip -
is also a member of a call pickup group can be picked up
by any Norstar set in that call pickup group. For more
information on Hunt Groups see "Programming Hunt
Groups" on page 135.

Changing a telephone's pickup group

Telephones can be put into and taken out of pickup groups.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
≠
telephone you want to program.
4. Press
Modular ICS 4.0 System Coordinator Guide
.
A Hunt Group call ringing at a Norstar set DN that
(the default System Coordinator
and enter the internal number of the
twice.
ƒ‡fi
.
P0881591 Issue 01