Do Not Disturb - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

54 / Making calls
Already joined
Calling 221
PRIORITY
Can't ring again

Do not disturb

PRIORITY
Expensive route
Hidden number
Line denied
Line001
No last number
No line selected
Modular ICS 4.0 System Coordinator Guide
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
Wait for the telephone to be answered. If no
LATER
one answers, press LATER to use the Ring
Again (page 60) or Message (page 98)
feature, or press PRIORITY to make a priority
call.
You cannot use Ring Again on your current
call. You can only use Ring Again while you
have a busy signal on an internal call or line
pool request or while an internal call is
ringing.
The telephone you are calling has Do Not
LATER
Disturb turned on. Press LATER to use the
Ring Again or Messages features, or press
PRIORITY to make a priority call.
You have dialed a number, but the least
expensive route that the system is
programmed to use is busy. Unless you
release the call, it goes through on a more
expensive route.
The last number you dialed or the number
you saved for Saved Number Redial was a
speed dial number that displayed a name
rather than the number. The number is dialed
correctly, but you cannot see it.
You have attempted to use someone else's
private line.
Enter the digits of the number you want to
TRANSFER
dial.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Either you have no prime line or your prime
line is busy. Select a line manually before
dialing.
P0881591 Issue 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents