Registration Password; Changing Passwords - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

Because the Basic password can be used to change the time,
you should give it out with care and change it when necessary
(for example, when an employee leaves the company). If
restrictions, routing or other services operate on a schedule,
changing the time can allow someone to bypass the
programming.

Registration password

The Registration password is used to control the registration of
Companion portables to the Norstar system. See the MICS-XC
Norstar-Companion System Coordinator Guide for more
information.

Changing passwords

You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
'
password).
3. Press
'
4. Press
5. Press
'
6. Press
7. Press
you want to change.
8. Use
password. Press OK to accept the new password.
You cannot erase or eliminate the ability to program
passwords.
P0881591 Issue 01
(the default System Coordinator
four times.
at Passwords.
until you see Progrming pswds ˆ.
.
until you see the name of the password
, CHANGE and the dial pad to enter the new
Using System features / 173
.
Modular ICS 4.0 System Coordinator Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents