Making Calls From An Isdn Terminal; Changing How You Dial Your Calls; Using Standard Dial - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

The programmed line pool button accesses a specific line pool,
not the line pool feature. See "Programming feature buttons"
on page 117 for more information.
If you program a button with an indicator to access a line pool,
when all the lines in a line pool are busy, the indicator for the
line pool button turns on. The indicator turns off when a line
becomes available.

Making calls from an ISDN terminal

ISDN terminals do not have line keys or intercom keys as do
Norstar telephones. To make an outgoing call from an ISDN
terminal, access an external line by entering a line pool code
or by using the ARS feature.

Changing how you dial your calls

ƒ•°¤
£
1. Press
˙
2. Press
3. Press
mode.
The dialing modes feature code cannot be programmed onto a
memory button.

Using Standard dial

Standard dial allows you to make a call by selecting a line and
dialing the number. If you have a prime line, it is selected
automatically when you lift the receiver or press
You cannot use Standard dial on an M7100 telephone unless
you pick up the receiver first. If you have an M7100 telephone,
use the Automatic dial or Pre-dial feature for on-hook dialing.
P0881591 Issue 01
or NEXT until the dialing mode you want appears.
or OK to select the displayed dialing
ƒ•°¤
.
Modular ICS 4.0 System Coordinator Guide
Making calls / 57
©
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents