Making Changes To Do Not Disturb On Busy - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

26 / Frequently used programming operations
Fwd on busy. . .
Fwd to:None
CHANGE
You can press CLR to change the destination back to
Fwd to:221
CLR
CHANGE
'
You can press
telephone, or press
heading.
End of session
Tip -
Call Forward on busy feature is overridden and the Hunt
Group call continues to ring until the hunt time has
expired. For more information on Hunt Groups see
"Programming Hunt Groups" on page 135.

Making Changes to Do Not Disturb on Busy

When you are on a call and a second call comes in, your
telephone rings softly to alert you to the second call. You can turn
this feature on or off for each telephone.
Begin the programming session
Jan 1
12:00pm
Feature:
Modular ICS 4.0 System Coordinator Guide
Press
Press CHANGE and enter the internal number where
you want the calls to be sent. In this example, it's 221.
®
Press
to end your session.
to continue programming capabilities for this
three times to return to the Terminals and Sets
If the Norstar set is a member of a Hunt Group, the
ƒ
Press
••¤flfl‹››
Press
.
.
None
.
.
P0881591 Issue 01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents