Replying To A Message Using An Analog Telephone Connected To An Asm - Nortel Modular ICS 4.0 Manual

If you want to call your voice message center using a line other
than the programmed line, exit your message list and dial the
voice message center telephone number using normal dialing
methods.
Replying to a message using an analog telephone connected
to an ASM
On an analog telephone connected to an Analog Station
˚•flfi
Module
Press
retrieves and connects the user to the oldest message
sender. (The message can originate from either the
designated direct-dial telephone or the internal voice mail
system.)
If the analog telephone has the Message Reply Enhancement
feature set to Yes, and the sender is the designated direct-dial
telephone, the message waiting indicator is turned off
automatically after the reply call is answered, no matter from
where the call is answered.
For analog telephones connected to an ASM, using the
Message Waiting Reply feature (
retrieves only internal messages sent to the user.
Analog telephones connected to an ASM cannot retrieve
˚•flfi
external messages by using the Message Waiting Reply
feature (
must call back the external voice mail center to retrieve their
messages. When doing so, the message waiting indicator on
the analog telephone is turned off automatically.
P0881591 Issue 01
Communicating in the office / 101
. The system automatically
˚•flfi
). For external messages, users
Modular ICS 4.0 System Coordinator Guide
),