Using Last Number Redial - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

Invalid number
Press a button
QUIT
Program and HOLD
Program and OK
QUIT
Programmed
For other displays, see "Common feature displays" on page 203.

Using Last Number Redial

ƒfi
Press
dialed.
Last Number Redial records a maximum of 24 digits.
Tip -
button, you can use Button Inquiry (
press the Last Number Redial button followed by
check the last number before you dial it.
P0881591 Issue 01
You are programming an internal autodial
button and have entered a number that is not
an internal number on your system. Enter a
valid internal number. If the number you are
entering is a destination code, use external
autodial.
Press the memory button you want to
program.
Enter the number you want to program onto
the button, then press
Enter the number you want to program onto
OK
the button, then press
may include a line or line pool selection in an
autodial sequence by selecting the line
before entering any digits.
The number is stored on the button.
to redial the last external number you
If you have a programmed Last Number Redial
Time savers for making calls / 65
˙
˙
ƒfi
ƒ•‚
Modular ICS 4.0 System Coordinator Guide
.
or OK. You
£
), then
) to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents