Table of Contents
Advertisement
136 / Programming Hunt Groups
•
members of a group
•
member position in a group
•
what lines are assigned to a group
•
how incoming calls are distributed
•
how long the system looks for available members
•
where a call goes if all members are busy
Note: Videophones should not be programmed as members of
a Hunt Group. Hunt Groups allow one B channel
connection at a time and videophones use two B
channels.
Features affected by Hunt Groups include:
•
Call Forward All Calls
•
Call Forward No Answer
•
Call Forward on Busy
•
Group Pickup
•
Transfer via Hold
•
Priority Call
•
Line Redirection
•
Page Zones
•
Voice Call
Adding or removing members from a group
Modular ICS 4.0 supports 30 groups programmed with up to
40 members per group to a maximum of 600 members system-
wide. For the recommended configuration please refer to the
Modular ICS Installer Guide. Members of the group can be
any Norstar set, CTA 500dm, ISDN terminal, or portables. A
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Advertisement
Table of Contents
