Canceling Line Redirection; Allowing A Telephone To Redirect Calls - Nortel Modular ICS 4.0 Manual

Modular system coordinator guide
Table of Contents

Advertisement

Tip -
can be used normally when it is not busy on a redirected
call. To avoid redirection failing because the chosen line is
in use, choose a line pool with several lines in it.
The system does not check that the number you give for
line redirection is a valid one. If you redirect to an invalid
number, redirection fails. Using an autodial button to enter
the redirection number helps avoid this possibility. An
autodial button used for line redirection must be
programmed to use a specific line.

Canceling Line Redirection

ƒ£°›
1. Press
2. Select the lines you no longer want to be redirected.

Allowing a telephone to redirect calls

You can turn a telephone's ability to redirect calls on and off.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
password).
3. Press
telephone you want to program.
"
4. Press
5. Press
Allow redirect:.
P0881591 Issue 01
The line chosen for redirecting calls on other lines
(the default System Coordinator
and enter the internal number of the
twice.
four times. The display reads
Forwarding your calls / 89
ƒ£°›
.
Modular ICS 4.0 System Coordinator Guide
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ics 4.0

Table of Contents